AABC to Exhibit at AHR Expo 2020

//AABC to Exhibit at AHR Expo 2020

AABC to Exhibit at AHR Expo 2020

Presenting on Fundamentals of Test, Adjust, & Balance

for Engineers, Cx & Energy Providers

 

(Washington, D.C. January 16, 2020) – The Associated Air Balance Council (AABC) will exhibit at AHR Expo 2020, the world’s largest HVACR marketplace, in booth 6253, collocated with its affiliated associations, the AABC Commissioning Group and Energy Management Association.

Highlights of AABC’s appearance include a presentation led by Mike Kelly, TBE, CxA (American Testing, Inc.), Fundamentals of Test, Adjust, & Balance for Engineers, Cx & Energy Providers. This practical, information-packed session explains many of the key test and balance challenges—from practical system design considerations, to the TAB Process, to obtaining meaningful and useful data—that if properly addressed in cooperation with an independent TAB firm, can ensure that any project goes smoothly. (Feb. 3, 2:30 PM – 3:30 PM Room W312C)

AABC is a co-presenter of CxEnergy 2020 the only conference and expo dedicated exclusively to Cx and energy management (April 6-9, San Diego, CA).

Read/Download News Release

By |2020-01-20T20:27:36+00:00January 20th, 2020|Uncategorized|0 Comments

About the Author:

admin
  • Suggested Drawing Specification

    An independent Testing and Balancing Agency certified by the AABC shall be engaged to Test and Balance the HVAC systems. Systems shall be balanced to plus/minus 10% of design requirements. The contractor shall place all systems and equipment into full operation for Testing and Balancing. One copy of the final Test and Balance report with the AABC National Performance Guaranty shall be sent directly to the engineer of record. Provide five (5) additional copies to the contractor.

  • AIA-Format LONG-FORM SPECIFICATION

    Section 230593 – TESTING, ADJUSTING AND BALANCING FOR HVAC

  • AIA-Format SHORT – FORM SPECIFICATION

    Section 230593 – TESTING, ADJUSTING AND BALANCING FOR HVAC