+321 123 4567   [email protected]   My Account
MTI (healthcare facility compliance) presenting a webinar with AABC

Healthcare Facility Compliance: Best Practices for an Independent, AABC Total System Balance Approach

Abstract:

In a hospital environment, proper ventilation is critical for patient and staff health and has strict regulations and reporting associated with it. The Total System Balancing (TSB) agency must possess a breadth of knowledge in many systems and ideally have ample experience in this very specific type of construction.  This presentation will provide an overview of the Total System Balancing (TSB) approach, beginning with the design to the final report to the owner’s representatives.

Learning Objectives:

  • Be able to explain the Total System Balance Approach, from the design phase to project closeout.
  • Understand what role proper controls integration/BAS play for optimal calibration.
  • Know which reports should be provided throughout the entire process and when.
  • Understand the owner/owner representative’s role throughout the process.

Sponsored By

Watch Now         Take Quiz         Download Slides

Date

Jun 15 2022
Expired!

Time

(Eastern)
2:00 pm
Category

Speaker

  • Brian Venn Brian Venn TBE, CxA, Mechanical Testing, Inc
    Brian Venn
    Brian Venn
    TBE, CxA, Mechanical Testing, Inc

    Brian Venn has 24 years in the Commissioning & Test and Balance Industry. Ranging from Distribution Centers to Cleanroom Environments, his experience is across all aspects of Commercial and Industrial applications of HVAC pertaining to the MEP discipline. Currently Certified by the Associated Air Balance Council as a Test and Balance Engineer. Additionally, Brian is certified as a Commissioning Authority by ACG.

LinkedIn

Contact Information

  • AABC Headquarters;
    1015 18th St. NW
    Suite 603
    Washington, D.C. 20036
  • Phone: 202-737-0202
  • Fax: 202-315-0285
  • [email protected]

Contact Us

PLEASE NOTE: If you have questions about becoming  AABC certified, please visit https://www.aabc.com/join-aabc and read the information there prior to submitting a question using this form.

  • Suggested Drawing Specification

    An independent Testing and Balancing Agency certified by the AABC shall be engaged to Test and Balance the HVAC systems. Systems shall be balanced to plus/minus 10% of design requirements. The contractor shall place all systems and equipment into full operation for Testing and Balancing. One copy of the final Test and Balance report with the AABC National Performance Guaranty shall be sent directly to the engineer of record. Provide five (5) additional copies to the contractor.

  • AIA-Format LONG-FORM SPECIFICATION

    Section 230593 – TESTING, ADJUSTING AND BALANCING FOR HVAC

  • AIA-Format SHORT – FORM SPECIFICATION

    Section 230593 – TESTING, ADJUSTING AND BALANCING FOR HVAC

    • Go to Top